JK2060AC

两相混合式步进电机驱动器

2phase hybrid stepper motor driver

概述

JK2060AC 两相混合式步进电机驱动器，采用交流24V~50V,直流30V~80V输入,，适合驱动电流小于6.0A,外径在86mm的混合式步进电机使用。此驱动器采用交流伺服驱动器的电流环进行细分控制，电机低速运行平稳，高速力矩稳定。广泛适合于各类CNC机械，机器人，切割机，包装机，绘图仪，雕刻机等，

Descriptions

JK2060AC is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 24~50V AC ,30V~80V DC, suit for currentless 6.0A, diameter is 86mm 2 phase hybrid stepper motor .this driver thatadopts similar to the Circuit of servo control which enables the motor to run smoothly.  It is widely used in CNC machine , robots,cuttingmachine,packing machine,plotter, engraving machine and so on.

特点

*平均电流控制，两相正弦电流输出

*交流24~60V，直流30V~80V

*光电隔离信号输入、输出

*有过压­﹑欠压­﹑过流­﹑相间短路保护功能

*十四档细分和自动半流功能

*八档输出相电流设置

*可驱动任何6.0A相电流以下两相、四相混合式步进电机,

*主要适合驱动86mm(NEMA34)两相步进电机

Features

*Averagecurrent control,2 phase sinusoidal output current drive

*supplyvoltage from 24VAC~50VAC,30VDC~80VDC

*Opto-isolatedsignal I/O

*Overvoltage,under voltage,overcurrent,phase short cicuit protection

*14channels subdivision and automatic idle-current reduction

*8channels output phase current setting

*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A

*mainlyfor 86mm(NEMA34)2 phase stepper motor

性能指标

输入电压   交流20V~60V, 直流30V~80V

输出电流   2.0A~6.0A

温   度   工作温度-10°~45°，存放温度-20°~125°

环境湿度   不凝露，不结霜

气   体   禁止有可燃气体和导电灰尘

重   量   600克

MechanicalSpecification

Input Voltage     20~60V AC, 30~80V DC

Output current    2.0A~6.0A

Temperature      working temperature -10°~45°,stockingtemperature ~20°~70°

Humidity         Not condensation , no water droplets

Gas             Prohibition of combustible gasesand conductive dust

Weight          600g

MechanicalDimension （mm）

上一篇：JK1545 两相驱动器 下一篇：JK2M2208 两相驱动器